INFLUENCE OF MORPHOLOGICAL CHARACTERISTICS OF POLYMER CAPACITOR FILMS ON THEIR DEFORMATION PROPERTIES

Authors

DOI:

https://doi.org/10.15588/1607-6761-2016-2-2

Keywords:

polymer films, comparative elongation at rupture, film dielectric.

Abstract

The purpose of thе work is the research of deformation properties of polymeric films under the conditions that simulate the operation of electrical devices.

Research methods are the experimental ones with processing of results by means of mathematical statistics.

The obtained results display the peculiarities of the polymer films’ structure and allow us to predict the higher stability of the mechanical and electrical characteristics of the film impregnated dielectric systems based on smooth polypropylene film compared with other studied ones.

Scientific novelty. Fundamental difference of histograms of the implementation frequencies of the investigated films elongation at break is given. It allows to use the specified characteristic as the parameter that determines the presence or absence of the dense crystalline layer in the dielectric film in its initial state.

Practical significance. Method for the polymer films structure diagnosis in original state, based on the study of the film elongation at break, differs from the traditional one by simplicity of use along with high reproducibility of results and is promising for the incoming quality control implementation of polymer films during the manufacture of power capacitors.

Author Biographies

A. P. Malyushevska, Institute of Pulse Processes and Technologies of NAS of Ukraine

Ph.D., associate professor, senior staff scientist of Institute of Pulse Processes and Technologies of NAS of Ukraine

A. N. Yushchishina, Institute of Pulse Processes and Technologies of NAS of Ukraine

Ph.D., associate professor, senior staff scientist of Institute of Pulse Processes and Technologies of NAS of Ukraine

References

Andreev A. M. Degradation of the impregnated polypropylene insulation of power capacitors under operating conditions / A. M. Andreev, N. M. Zhuravleva, M. Yevtich // Electrical Technology Russia. – 2002. – № 3. – P. 96–106; Laghari J. R. A review of AC and pulse capacitor technology / J. R. Laghari // Appl. Phys. Comm. – 1986. – Vol. 6., № 2. – P. 213–251.

Справочник по электротехническим материалам / Под ред. Ю. В. Корицкого, В. В. Пасынкова, Б. М. Тареева. – В 3 т. – Т.2. – М.: Энергоатомиздат, 1987. – 467 с.

Гуль В. Е. Структура и прочность полимеров / В. Е. Гуль. – М.: Химия, 1978. – 326 с.

Малюшевська А. П., Дмитрішин О. Я., Топоров С. О. Дослідження впливу підвищених температур на експлуатаційні властивості трансформаторного масла Т-1500 в плівкових ізоляційних системах. – Електротехніка та електроенергетика. – №1. – 2015. – С. 21–25.

Малюшевська А. П., Топоров С. О. Вплив складу і морфології конденсаторних полімерних плівок на термостабільність їх короткочасної електричної міцності– Електротехніка та електроенергетика. – 2016. – №1 – С. 18–24.

Цой Б., Карташов Э. М., Шевелев В. В., Валишин A. A. Разрушение тонких полимерных пленок и волокон. – М. : Химия, 1997. – 342 с.

How to Cite

Malyushevska, A. P., & Yushchishina, A. N. (2016). INFLUENCE OF MORPHOLOGICAL CHARACTERISTICS OF POLYMER CAPACITOR FILMS ON THEIR DEFORMATION PROPERTIES. Electrical Engineering and Power Engineering, (2), 13–18. https://doi.org/10.15588/1607-6761-2016-2-2